Product Examination Continued:

PWM fan controller uses the black and green PCB to support its circuitry. Left of the main power connector contains two 3-pin fan connectors for fan 2 and fan 3. In between the fan connectors are Power 1 and Power 2 connectors for 12V products.

To and on the right of the main connector is the power connector itself and 3-pin fan connections for fan 1.

Final Words...

Noise Isolator’s PWM is a multi-purpose controller that is well built and professionally designed. For the most part, all cables were in the package except for an extra power switch cable. Noise Isolator could have included the cable in the kit. Even though the cable can be purchased at low charges, it prevents the PWM kit from being an all-rounder product. Dominant white text on the black foreground was impressive. LEDs and lighting options on the controller inserted a great touch to the product, which will attract many modders and enthusiasts. The main point to note is the ability to control six fans and two 12V products. We would like to address the plastic standoff issue again to both you and the manufacturer. It is not a difficult thing to fix so we expect to see improvement done on this part in future revisions. The PWM fan controller deserves serious attention if you are looking for a fan controller.

You may check ADPmods for latest prices and availability.