On the back of the box Zalman has listed all the
specs for this controller.
In the above picture, you can see all the labels.
In our opinion, Zalman went a little overboard with their labeling
concept.
There are four wires with 3-pin connectors that
come with this controller. All of the 4 wires connect to the back
of the controller to a green PCB.
This controller uses a Molex connector to work.
If you look at the above picture closely you can see that there
are 2 green squares attached to the PCB by 2 screws. These are
used to connect the cold cathode lights to this controller.
